一、產品介紹
A, product introduction
ZYSP-2型水平燃燒試驗機+針焰燃燒一體機是根據標準GB-T2408-2008中針對水平垂直燃燒試驗的規定與GB5169.5-2008 及GB4706.1-2005中關于針焰燃燒試驗的規定而研制的，水平燃燒試驗機+針焰燃燒一體機*國家標準及相關UL、IEC標準的新型綜合設備，是目前市場上*一款中和了兩類不同試驗方法的*性儀器。除設備本身大功能的*性外，該款水平燃燒試驗機+針焰燃燒一體機自動點火、自動計時；同時水平和垂直燃燒式樣夾由電機控制，可以自動上下左右移動，不需要人工手撥；以上功能都是別的廠家同類產品不具備的。
ATI-2 type horizontal and vertical needle flame machine, according to the provisions on the needle flame test standard GB-T2408-2008 regulations for horizontal and vertical burning test with GB5169.5-2008 and GB4706.1-2005 nd the development of the new type of integrated equipment, fully meet the national standards and related UL and IEC standards, is currently on the market only a neutralization. Two different test methods of original instrument. In addition to the original function of the equipment itself, automatic ignition, automatic timing of the instrument; and the horizontal and vertical combustion style clip is composed of motor control, can automatically move up and down, do not need artificial hand; the above functions are similar products of other manufacturers do not have the.
二、主要技術參數
Two, the main technical parameters
① 針焰部分
Needle flame section
1.針狀燃燒器：內孔 Φ 0.5mm ± 0.1mm ，外徑 ≤Φ 0.9mm ，長 ≥ 35mm，
1 needle burner: hole diameter of 0.5mm + 0.1mm, the outer diameter of more than Phi 0.9mm, length of more than 35mm,
2.燃燒器施焰角度：0- 45°( 任意調節 )
2 burner flame angle: 0- 45 degrees (optional)
3.施燃時間：0-999.9s±0.1s任意可調 (火焰自動進退，無需動手操作)
3 burning time: 0-999.9s + 0.1s arbitrary adjustable (flame automatic advance and retreat, no hands-on)
4.持燃時間：0-999.9s±0.1s，自動記錄，手動暫停
4 holding time: 0-999.9s + 0.1s, automatic recording, manual suspension
5.火焰高度：12mm ± 1mm (帶高度測量尺)
5 flame height: 12mm + 1mm (with height gauge)
6.針頭高度：大于35mm（內徑ф0.5，外徑ф0.9）
6 needle height: (diameter greater than 35mm diameter Phi 0.5, Phi 0.9)
7.施燃氣體： 95% 丁烷氣 ( 可采用瓶裝液化石油氣)
7 the use of gas: 95% butane gas (can be bottled liquefied petroleum gas)
8.氣量大小可調（流量計）
8 air volume adjustable (flowmeter)
9.溫度測試范圍：0~1000℃
9 temperature test range: 0~1000
10.火焰溫度要求：從100℃±2℃升到700℃±3℃的時間在23.5秒±1秒之內
10 flame temperature requirements: from 100 DEG C to + 2 C to + 700 C + + C / C in the time of 23.5 seconds + 1 second
11.測溫?zé)犭娕迹?Phi;0.5mm進口鎧裝（K型）熱電偶
11 temperature measuring thermocouple: 0.5mm (K type) thermocouple
12.傳熱銅塊：Ф4.0x6.0mm
12: heat transfer copper block with 4.0x6.0mm
13.試驗背景：黑背景
13 background: black background
14.試驗過程：試驗程序自動控制，獨立抽風
14 test process: automatic test program control, independent exhaust
② 水平垂直試驗部分
Horizontal vertical test section
1.環境溫度：室溫～40℃； 相對濕度：≤75％；
1 ambient temperature: room temperature to 40 DEG C; relative humidity: less than 75%;
2.供電電壓和功率：220V±10％ 50HZ 功率150W
2 power supply voltage and power: 220V + 10%50HZ power 150W
3.本生燈自動點火時間：任意設定
3 automatic ignition time: arbitrary setting
4.本生燈內徑9.5mm±0.5mm
4 Bunsen lamp diameter 9.5mm + 0.5mm
5.氣源：液化石油氣（仲裁時加工業甲烷氣）；
5 gas source: liquefied petroleum gas (Arbitration);
6.工作電源 ： 220V AC 50HZ
6 power supply: 220V AC 50HZ
7.計時范圍：0~999s 記時精度：10s±0.2s 30s±0.2s；
7 timing range: 0~999s 10s + 0.2S clock precision: 30s + 0.2s;
8.施焰時間 ： 0～999.9S（可調）
8 duration: 0 ~ 999.9S (adjustable)
9.余焰時間 ： 0～999.9S（可調）
More than 9 flame time: 0 ~ 999.9S (adjustable)
10.余灼時間 ： 0～999.9S（可調）
More than 10 burning time: 0 ~ 999.9S (adjustable)
11.燃燒角度 ： 0°、20°、45°可選擇
11 combustion angle: 0 degrees, 20 degrees, 45 degrees can be chosen
12.火焰高度 ： 20mm ~ 175mm 可調
12 flame height: 20mm ~ 175mm adjustable
13.火焰溫度：（100-1000）℃可調
13 flame temperature: (100-1000) adjustable
14.氣體流量 ： 氣體流量105ml/min-1000ml/min可調
14 gas flow: gas flow 105ml/min-1000ml/min adjustable
15.燃 燒 燈 ： 燈管內徑9.5±0.3mm,長度：100mm±10mm
15 combustion lamp: tube diameter 9.5 + 0.3mm, length: 100mm + 10mm
16.時間裝置 ： 能精確到0．5S
16 time device: accurate to 0.5S
17.位置調節 ： 樣品夾支架可上下、左右調節，燃燒座可前后調節，調節行程均大
17 position adjustment: the sample holder can be adjusted up and down, left and right, and the combustion seat can be adjusted before and after, and the adjusting stroke is large
三、設計標準：
Three, design standards:
水平垂直燃燒試驗部分設計國標：GB-T2408-2008《塑料燃燒性能的測試-水平法和垂直法》
National standard for horizontal and vertical combustion test: GB-T2408-2008 "test of plastic combustion performance - horizontal and vertical method"
水平垂直燃燒試驗部分適用標準：UL94-2006、GB-T 5455 、 GB-T13488 、GB-T5169IEC60695-11-3、IEC60695-11-4、IEC60950-1、IEC695-2
Horizontal vertical combustion test part applicable standards: UL94-2006, GB-T 5455, GB-T13488, GB-T5169IEC60695-11-3, IEC60695-11-4, IEC60950-1, IEC695-2
針焰試驗部分設備國標：GB5169.5-2008電工電子產品著火危險試驗 第5部分：試驗火焰 針焰試驗方法 裝置、確認試驗
Needle flame test part of the national standard equipment: GB5169.5-2008 electrical and electronic products fire hazard test fifth parts: test flame needle flame test method, validation test
GB4706.1-2005 家用和類似用途電器的安全通用要求
GB4706.1-2005 General requirements for the safety of household and similar electrical appliances