瑞典Friborg跟蹤測試儀
在正常使用時,絕緣材料可能暴露在潮濕環境中。
和污垢,可以創建帶電部件之間的導電路徑。
本試驗設備模擬通過施加電壓在兩
放在被測試的材料的電極。導電的溶液
允許落在電極之間的材料,以便
電流在材料表面。
技術規格
•全自動測試
電控精密泵
•封閉測試和風扇取出氣體柜
•鉑電極的測試標準要求
•電極電壓100-600伏
•大型1800 VA變壓器足夠的短路電流也
在較低的電壓,通過測試標準要求
•安全運行的絕緣變壓器和聯鎖開關
•間隔時間:30秒
•滴數計數器
•故障指示超過0.5個2秒
•短路電流可調至1 A
•指標測試情況:測試/準備/失敗
瑞典Friborg跟蹤測試儀
During normal use, insulation material may be exposed to moisture
and dirt that can create a conductive path between live parts.
This test equipment simulates this by applying a voltage on two
electrodes placed on the material to be tested. A conductive solution
is allowed to drop on the material between the electrodes so that a
current can flow on the surface of the material.
Technical specifications
• Fully automatic testing
• Electronic controlled precision pump
• Closed cabinet for testing and fan to take out gases
• Platinum electrodes as required by the test standard
• Electrode voltage 100-600 VAC
• Large 1800 VA transformer for sufficient short circuit current also
at lower voltages, as required by the test standard
• Insulating transformer and interlock switch for safe operation
• Interval between drops: 30 seconds
• Counter for number of drops
• Fault indication over 0,5 A in 2 seconds
• Short circuit current adjustable to 1 A
• Indicators for test status: Testing / Ready / Fail
4200型跟蹤測試儀
在正常使用時,絕緣材料可能暴露在濕氣和污垢中,從而在帶電部件之間形成導電通路。跟蹤測試設備通過在被測試材料上的兩個電極上施加電壓來模擬這一點。導電溶液被允許滴落在電極之間的材料上,這樣電流就可以在材料表面流動。
用于測試標準:
IEC 60112
IEC 60335-1附錄N
IEC 60065
IEC 61010-1
IEC 61558-1
IEC 60884-1
UL 746