FT-106普通磨料堆積密度測定儀
FT-106Common abrasive bulk density tester
一． 參照標準standard：
ISO9136：1989《粗磨粒 堆積密度的測定》和行業標準JB／T7984.2-1999《普通磨料 粗磨粒堆積密度的測定》的相關要求；GB/T20316.1-2009堆積密度測定儀要求；適用于檢測制造固結磨具和涂附磨具的粗顆粒普通磨料的堆積密度
According to the international standardISO9136:1989 "the determination of coarse grinding grain bulk density” andindustry standards JB/T7984.2-1999 the relevant technical requirements of ordinary abrasive coarse grinding grain ofbulk density determination, at the same time meet the requirements ofGB/T20316.1-2009 bulk density meter;It is suitable to test the packing densityof coarse grain grinding materials, which can be used in the manufacture ofconsolidation grinding tools and coated abrasive tools.
二．參數資料Technical Parameters
1.1漏斗材質：不銹鋼；
Funnel material: stainless steel.
1.2漏斗尺寸：高度240mm；頂部直徑160mm；出口直徑：(20±0.5)mm；
漏斗底部與測量筒上口的距離：（76±1）mm 測量筒尺寸：內徑64mm； 凈高度62mm 測量筒容積：.(200±0.5) cm3 測量誤差：≤±0.02g/cm3
Funnel dimensions: height 240mm, topdiameter 160mm, outlet diameter: (20±0.5)mm, the distance between the bottom of the funnel and the top ofthe measuring cylinder: （76±1）mm, measuring cylinder dimensions:inner diameter 64mm, net height: 62mm, measuring cylinder volume: (200±0.5) cm3, measurement error：≤±0.02g/cm3.
2.1測量誤差：≤±0.02g／cm3。Measurementerror：≤±0.02g/cm3.
2.2測量筒容積：200±0.5cm3。Measuring cylinder volume: (200±0.5) cm3.
2.3外形尺寸：230mm（長）×250mm（寬）×425mm（高）
Dimensions: 230mm (L) * 250mm (W) * 425mm (H)
FT-106普通磨料堆積密度測定儀視頻文件鏈接：
/v_show/id_XMTMyMTM1MTM2MA==.html?spm=a2hzp.8253869.0.0
