MTL-5 - Mini Tea CO2 激光器
MTL-5 - Mini Tea CO2 激光器由美盛科技中國有限公司供應
MTL 5 是一個契約，方便用戶、 臺式茶 (橫向激動的大氣壓力） 脈沖 CO2 激光。
MTL 5 功能自診斷測試和內置，失敗旨在監視系統性能和支持系統的完整性的安全機制。激光提供科學的各種高性能規格和專業應用程序
MTL 5 可以在任一多模式或單模式 （TEM00） 配置操作。多模式輸出能量的額定值在 150mJ / 100 hz 的脈沖。
增加的**選定的光圈大會使單個橫向模式操作。激光輸出能量無波長選擇 TEM00 單一空間模式操作的額定值在 80mJ/脈沖。與手動調諧的光柵選項一起使用時，需要此配置。與手動光柵調諧選項輸出能量是 50mJ/脈沖。
MTL 5 提供一個單獨的電源，使用戶能夠優化空間而不損害他們的實驗。電源和頭之間互連的已知的正當理由生命周期。
可選波長選擇單位與精度光柵控制使用戶一步曲輕松之間的波長。
激光頭
圓柱的激光頭包含異型電極提供同質的放電。一系列的 UV 火花前 ionisers 的間距沿放電長度。激光氣體是通過一個流量分庭，橫跨整個放電節給優化統一氣體流量內部分發。激光氣體通過積分的熱交換器，為 20 赫茲以上的操作需要冷卻水冷卻。
激光氣體已得到了優化到一個專有的氣體混合物，和激光具有 2 種操作的主要模式： 流動或緩慢流動。流模式提供*大輸出能量作為，并利用標準 3 組件氣體混合物。此外，緩慢流 （< 0.5I / min) 可以實現。
電源
電源包含開關模式充電機組額定為 1000J/秒，25kV，和主放電電容器是閘流管切換為低命令抖動和*高的可靠性。供應執行**的放電通過光纖，確保系統性能，遠程監測系統的完整性和弧事件檢測。供應將關閉激光的潛在系統損害的發生風險時，指示系統狀態指示燈 LED 的范圍。
供應可切換讀取放電電壓或重復率控制功能的液晶顯示器，供應也可以接受外部觸發器控制輸入。
光柵調諧的選項 — — 手動調整
9.2 和 10.8 微米之間 60 線上的操作被通過添加優化選項的光柵。
新的和改進高精度、 低手動調諧激光頭位置，*后方反光鏡大會配套重視。低大會是現在一些第三方 USB 控制兼容自動化千分尺驅動器。光柵被分開放電容量由布魯斯特的窗口。*大的能源是 50mJ 每脈沖強增益線上。
Pulsed Gas Laser Series
MTL-5 - Mini Tea CO2 Laser
The MTL-5 is a compact, user-friendly, bench-top TEA (Transverse Excited Atmospheric Pressure) pulsed CO2 Laser.
The MTL-5 features self-diagnostic testing and built-in, fail safe mechanisms designed to monitor system performance and to support system integrity. The laser offers high performance specifications for a variety of scientific and specialist applications.
The MTL-5 can be operated in either multi-mode or single mode (TEM00) configuration. Multi-mode output energy is rated at 150mJ / pulse at 100Hz.
The addition of a precisely selected aperture assembly enables single transverse mode operation. Laser output energy TEM00 single spatial mode operation without wavelength selection is rated at 80mJ/pulse. This configuration is required for use with the manual tuned grating option. With manual grating tuned option output energy is 50mJ/pulse.
The MTL-5 is supplied with a separate power supply that enables users to optimise space without compromising their experiments. The interconnection between the power supply and head has a known warranted lifetime.
An optional wavelength selection unit with precision grating control enables users to step tune easily between wavelengths.
Download the MTL-5 Technical Specification
Watch product video
Laser Head
The cylindrical laser head contains profiled electrodes to provide a homogenous discharge. A series of UV spark pre-ionisers are spaced along the discharge length. The laser gas is circulated internally via a flow chamber to give optimised uniform gas flow across the entire discharge section. The laser gas is cooled via an integral heat exchanger which requires water cooling for operation above 20 Hz.
The laser gas has been optimised to a proprietary gas mixture and the laser has 2 main modes of operation: Flow or Slow Flow. The Flow mode provides maximum output energies as specified, and utilises a standard 3 component gas mixture. In addition, Slow Flow (<0.5I/min) can be achieved.
Power Supply
The power supply contains a switch mode charging unit rated at 1000J/sec, 25kV, and the main discharge capacitors are thyratron switched for low commａnd jitter and highest reliability. The supply performs sophisticated discharge monitoring remotely via an optical fibre to ensure system performance, system integrity and arc event detection. The supply will shut down the laser in the event of risk of potential system damage occurring and indicate the system status with a range of indicator LED’s.
The supply has a LCD display switchable to read discharge voltage or repetition rate control functions, the supply can also accept external trigger control inputs.
Grating Tuned Option – Manual Tuning
Operation on 60 lines between 9.2 and 10.8 microns is achieved by adding the grating tuning option.
A new and improved high precision, low backlash manual tuning accessory attaches to the laser head in place of the * rear reflector assembly. This low back lash assembly is now compatible with some third party USB controlled automated micrometer drives. The grating is separated from the discharge volume by a Brewster window. Maximum energy is 50mJ per pulse on the strong gain lines.
