淋雨試驗箱主要用于電子電工產品考核外殼和密封件在水試驗后或在試驗期間能否保證設備和組件良好的工作性能.
淋雨試驗箱特點 |
◆ 采用人機界面可編程控制使操作簡單便捷
◆ 采用伺服驅動系統，提高精準度和模組化生產
◆ 純水系統多重過濾，達到真正100%循環用水
◆ 大視窗可目視實驗全過程
◆ 任意擺管角度直接貼觸輸入，方便直觀無需手動調節
◆ 實驗有效角度10度～320度任意角度調整
淋雨試驗箱應用標準 |
符合GB10485-89 GJB150.8-86 GB4208-2006 GB4942-93等國家標準。
淋雨試驗箱技術參數 |
Models | BY-LX | BY-LX | BY-LX |
Dimensions of working room | 800X800X800 | 1000X1000X1000 | 1500X1500X1500 |
Dimensions | 1020X1200X1000 | 1220X1400X2000 | 1700X1900X2500 |
Acreage of test platform | ∮mm(Description of order) | ||
Diameter of speaying hole | ∮0.4/1.2mm(Description of order) | ||
Interval of spraying holes | 50/12.5mm(Description of order) | ||
| Radius of spraying ball | R375/500mm | ||
| Diameter of speaying pipe | ∮16mm | ||
Swing of swing pipe | 6009001300 | ||
| Spraying angle of swing pipe | ±600、±900 | ||
| Adjustment of swing speed | Stepless | ||
Spraying water pressure | about 80 kpa,98kpa adjustable | ||
| Water pressurecontrol | Flow meter | ||
| Time relay | Imported micro-PC time-programmable integrated controller(Moller) | ||
| Controller | Imported frequency converter | ||
| Rotation speed of test platform | 1-17r/min | ||
淋雨試驗箱結構特點 |
 |  |
 |  |
