英國 美國 Megger AVO
二次側電流電壓注入設備
Secondary Current Injection Test Set
一、產品特點
- 輸出為 100Aa.c , 240Va.c,240Vd.c.
- 為斷電器提供 120Va.c. 的輔助輸出
- 用特制的計時器測試 IDMT 斷電器和斷路器
- 過載自動保護裝置
二、產品說明
----這種測試設備外表堅固,適合野外的現場操作。其額定輸出為 100A/1.8KVA ,內設計時器、可測瞬時斷電器、 IDMT 斷電器、定向斷電器和儀表。
輸出電流和輸出電壓可調 :
0-100 Aa.c 或 0-24 Va.c
0- 30 Aa.c 或 0-80 Va.c
0- 10 Aa.c 或 0-240 Va.c
----輸出電流的平均值可從電流流經的公共端取得,分辨率是 10mA 。該設備還具有 0-240Vd.c 可調的電壓及一個 0-120 Va.c. 的電壓輸出供測試定向斷電器用。
----電壓、電流和時間分別由兩個數字 LED 顯示。在測試之前,用 SET/TEST 開關選擇適當的電流以便進行準確的測試并避免錯接電流造成斷電器線圈的損壞。計時器有三個規定的操作方式:“正常”、“倒計”和“人工”。這些保證了斷電器的保護作用得到充分的測試。將一個 SF30 過濾器連到 SCITS100 的輸出端用來校準波形。
三、產品應用
----在過載斷電器和斷路器等保護裝置進行安裝或需要定期檢查時,使用二次電流注入測試設備可避免電力故障的出現,造成設備損壞和人員傷亡。
四、技術參數
輸出電流: 0-100 A 或 0-24 Va.c
0- 30 A 或 0-80 Va.c
0- 10 A 或 0-240 Va.c
負載周期: 對短時電流:通電 1 分鐘,停電 15 分鐘;
對短時電流的一半:通電 5 分鐘,停電 15 分鐘;
對短時電流的四分之一:連續運行
輸出電壓: 0-240Vd.c , 1A
0-120Va.c , 0.5A
顯示: 電流 / 電壓 :3 1/2 位——數字 LED 顯示
計數器: 5 位——數字 LED 、石英控制( 3,2768MHZ )。 9 分 59.9. 秒超范圍指示。
SCITS100
Secondary Current Injection Test Set
- Test outputs to 100 A a.c., 240 V a.c., 240 V d.c.
- Auxiliary output to 120 V a.c. for directional relays
- Integral custom timer for testing IDMT relays or circuit breakers
- Automatic protection against current or thermal overload
The SCITS100 Secondary Current Injection Test Set has a maximum rating of 100 A/1,8 kVA and a built-in timer unit. The test set is constructed in a rugged metal case with large carrying handles for practical field operations. The SCITS100 will test instantaneous relays, IDMT relays, directional relays, moulded circuit breakers and metering.
Current or voltage at each of the three main sets of a.c. terminals is completely variable by use of the main output control. The outputs from these terminals are:
• 0 to 100 A a.c. or 0 to 24 V a.c.
• 0 to 30 A a.c. or 0 to 80 V a.c.
• 0 to 10 A a.c. or 0 to 240 V a.c.
3701