安捷倫33220A 函數/任意波形發生器

• 20MHz正弦波和方波

• 脈沖、斜披、三角波，噪聲和直流波形

• 14-bit,50MSa/s，64K點任意波形

• AM、FM、PM、FSK和PWM凋制

• 線性和對數掃描及脈沖串模式

• 10mVpp至10Vpp幅苗范圍

• 圖形化界面可以對信號設置進行可視化驗證

• 通過USB、GPIB和LAN連接

性能優異的各種函數的波形

　　Keysight(原Agilent) 33220A函數/任意波形發生器使用直接數字合成(DDS)技術，可生成穩定、精確、純凈和低失真的正弦輸出信號。它還能提供高達20MHz、具有快速上升和下降的方波，以及達200KHz的線性斜波。

脈沖沿信號

　　33220A能產生達5MHz的可變沿時間脈沖。33220A的脈沖還能具有可變的周期、脈沖寬度和幅度，對于需要靈活脈沖信號的各種應用是很理想的設備。

專用波形產生

　　可用33220A產生復雜的專用波形。33220A具有14bit分辨率和50MSa/s采樣率，因此能夠靈活地生成所需的波形。非易失存儲器中可保存4個波形。

　　有了Keysight(原Agilent) IntuiLink任意波形軟件，您就可使用波形編輯器容易地生成、編輯和下載復雜的波形。也可用IntuiLink捕獲示波器波形，把它作為輸出發送至33220A。

易于使用的功能

　　33220A的前面板操作簡捷而友好。只需使用一、兩個鍵，您就能訪問所有主要功能。旋鈕或數字鍵可用來調節頻率、幅度、偏置和其它參數。您甚至還能直接輸入Vpp、Vrms、dBm或高低電平值。定時參數可以用Hertz(Hz)或秒為單位輸入。

　　內部AM、FM、PM、FSK和PWM調制使儀器能容易地調制波形，而不需要單獨的調制源。線性和對數掃描也是內置功能，掃描速率可在1ms至500s范圍內選擇。脈沖串模式允許用戶選擇每段時間的周期。GPIB、LAN和USB接口均為標準配置，您還能獲得SCPI命令的編程能力。

外部頻率基準(選件001)

　　33220A外部頻率基準使您能同步于外部10MHz時鐘、另一臺33220A，或Keysight(原Agilent)33250A。相位調整可從前面板或通過計算機接口進行，以實現精確的相位校準和調節。

Agilent 33220A function/arbitrary waveform generator

20MHz sine and square waves

Pulse, oblique, triangular, noise and dc waveforms

14-bit,50MSa/s, 64K point arbitrary waveform

AM, FM, PM, FSK and PWM dying systems

Linear and logarithmic scanning and pulse train patterns

Range of 10mVpp to 10Vpp seedlings

The graphical interface can visually verify the signal Settings

Connect via USB, GPIB, and LAN

Excellent performance of various function waveforms.

Keysight (original Agilent) 33220A function / arbitrary waveform generator uses direct digital synthesis (DDS) technology to generate stable, accurate, pure and low distortion sinusoidal output signals. It can also provide up to 20 MHz, with fast rising and falling square waves, as well as linear oblique waves up to 200KHz.

Pulse edge signal

33220A can produce variable edge time pulse up to 5MHz. 33220A pulse can also have variable period, pulse width and amplitude. It is an ideal equipment for various applications requiring flexible pulse signals.

Special waveform generation

33220A can be used to generate complex special waveforms. 33220A has 14bit resolution and 50MSa/s sampling rate, so it can generate the required waveform flexibly. Four waveforms can be saved in non-volatile memory.

With Keysight (formerly Agilent) IntuiLink arbitrary waveform software, you can easily generate, edit, and download complex waveforms using a waveform editor. IntuiLink can also capture oscilloscope waveform and send it as output to 33220A.

Easy-to-use function

The front panel of 33220A is simple and friendly. With one or two keys, you can access all the main features. Knobs or numeric keys can be used to adjust frequency, amplitude, bias and other parameters. You can even directly input VPP Vrms DBm or high or low level values. The timing parameter can be entered in Hertzian Hz) or in seconds.

Internal AM、FM、PM、FSK and PWM modulation make it easy for the instrument to modulate the waveform without the need of a single modulation source. Linear and logarithmic scans are also built-in, with scanning rates ranging from 1ms to 500s. The burst mode allows the user to select cycles for each period of time. GPIBN LAN and USB interfaces are both standard configured, and you can also gain the full programming capability of the SCPI command.

External frequency reference (option 001)

The 33220A external frequency reference allows you to synchronize with the external 10MHz clock, another 33220A, or Keysight. Phase adjustment can be performed from the front panel or through a computer interface to achieve accurate phase calibration and adjustment.