MHY32礦用通信電纜(圖)MHY32吊線電纜
煤礦用阻燃通信電纜礦用通信電纜 |
|
FIRE-RETARDANT COMMUNICATION CABLES FOR COAL MINES 產品用途:產品用于煤礦井下市話通信干線、配線和用戶線路。 Scope of application:The product uses in the coal mine mine shaft telephone communication skeleton line, matches the line and the subscriber's loop 執行標準 Standards implemented:MT 81814-1999 |
|
型號、名稱及使用范圍礦用通信電纜 Model、Descriptions and Use scope 型號
Model | 名 稱
Descriptions | 使 用 范 圍
Use scope | MHYV | 煤礦用聚乙烯絕緣聚氯乙烯護套通信電纜
PE insulated PVC sheathed communication cables for coal mines | 用于平巷、斜巷及機電硐室
Served in level,slanted channels and power house | MHJYV | 煤礦用加強型線芯聚乙烯絕緣聚氯乙烯護套通信電纜
Reinforced core PE insulated PVC sheathed communication cables for coal mines | 用于機械損傷較高的平巷和斜巷
Served in level and slanted channels where mechanical damage is frequent | MHYBV | 煤礦用聚乙烯絕緣鍍鋅鋼絲編織鎧裝聚氯乙烯護套通信電纜
PE insulated galvanized steel wire weave armored PVC sheathed communication cables for coal mines | 用于機械沖擊較高的平巷和斜巷
Served in level and slanted channels where mechanical damage is frequent | MHYAV | 煤礦用聚乙烯絕緣鋁-聚乙烯粘護層聚氯乙烯護套通信電纜
PE insulated Al/PE binding layer PVC sheathed communication cables for coal mines | 用于較潮濕的斜井和平巷
Served in level and slanted channels with high humidity | MHYA32 | 煤礦用聚乙烯絕緣鋁-聚乙烯粘結護層鋼絲鎧裝聚氯乙烯護套通信電纜
PE insulated Al/PE binding layer steel wire armored PVC sheathed communication cables for coal mines | 用于豎井或斜井
Served in shaft and slanted shaft |
使用特性 Service characteristics礦用通信電纜 電纜長期允許工作溫度 Long-term service temperature of the cable conductor | -40℃-+50℃ | 電纜敷設溫度 Cable laying temperature | ≥-10℃ | +25℃時環境相對濕度
Environment relative humidity at 25℃ | ≤95% | 電纜的小彎曲半徑 Minimun bending radius | MHYV及MHJYV型電纜為電纜外徑的10倍，其它型號為外徑的15倍 10 times of the cable outer diameter of MHJYV, and 15times for the rest |
電纜規格 Specifications 型 號
Model | 規 格
Specifications | 導體結構(根/直徑)mm
Conductor structure(number/diameter) | MHYV | 1x2、2x2、1x4、5x2 | 7/0.28 | MHJYV | 1x2、2x2 | 4/0.28銅線+3/0.28鋼線 4/0.28
copper wire +3/0.28 steel wire | MHYBV | 5x2、10x2、20x2 | 1/0.8 | MHYAV | 20x2、30x2、50x2 | MHYA32 | 30x2、50x2、80x2 |
MHY32礦用通信電纜(圖)MHY32吊線電纜 礦用通信電纜
電纜主要技術性能 Major technical performances
1、電纜導體直流電阻及固有衰減 DC resistance of the conductor and Intrinsic attenuation礦用通信電纜 型 號
Model | 20℃時導體直流電阻
DC resistance of conductor at 20℃
≤Ω ( ， /km) | 固有衰減(800Hz)
Intrinsic attenuation
≤( ,dB/km) | MHYV | 45 | 1.10 | MHJYV | 73 | 1.30 | MHYBV MHYAV MHYA32 | 36.7 | 0.95 |
2、電纜其它主要技術性能 Other major technical performances ( MHYV、MHJYV、MHYBV MHYAV、MHYA32) 序 號
Serial number | 項目
Items | 技術性能
Technical performances | 1 | +20℃線芯直流電阻(≤Ω/Km)
Line core DC resistance at 20℃ | 見上表 See above table | 2 | 電纜固有衰減(≤dB/Km)
Cable intrinsic attenuation | 見上表 See above table | 3 | +20℃絕緣電阻(≥MΩ Km) Insulating resistance at 20℃ | 3000 | 4 | lmin工頻交流電壓試驗
lmin power frequency alternating current pressure test | 1500V不擊穿(50Hz)
1500V Does not penetrate | 5 | 遠端串音衰減(≥dB/500)
Far-end crosstalk attenuation | 70(800Hz) | 6 | 電感(≤μH/Km)
Inductance | 800(800Hz) | 7 | 電纜工作電容(≤μF/Km)
Cable service capacity | 0.06(800Hz) | 8 | 工作對直流電阻差(≤%環阻)
DC resistance difference | 2 | 9 | 單根垂直燃燒試驗
Combustion for single cable test | MT386 | 10 | 成束燃燒試驗
Combustion for bunched cable test | 符合GB/T18380標準中B類成束燃燒試驗要求
Conforms to GB/T18380 standard B kind becomes ties the burning test |
|
局內光纜
6.1局內光纜一般從局前入孔經地下進線室引至光端機。由于路由復雜，宜采用人工布放方式。布放時上下樓道及每個拐彎處應設專人，按統一指揮牽引，牽引中保持光纜呈松弛狀態，嚴禁出現打小圈和死彎。
6.2局內光纜應作標志，以便識別。
6.3光纜在進線室內應選擇安全的位置，當處于易受外界損傷的位置時，應采取保護措施。
6.4光纜經由走線架、拐彎點（前、后）應予綁扎。上下走道或爬墻的綁扎部位，應墊膠管，避免光纜受側壓。
6.5按規定預留在端機側的光纜，可以留在光端機室或電纜進線室。有特殊要求預留的光纜，應按設計要求留足。
