紫外線強度溫度計記錄儀YK-37UVSD特色
*UVA,UVC紫外線光度計。
紫外線強度溫度計記錄儀YK-37UVSD參數規格
控制電路 | 微處理器LSI電路定制。 |
顯示器 | 液晶顯示器尺寸:52毫米×38毫米 綠色背光液晶顯示器(ON/OFF)。 |
測量 | 紫外光:UVA,UVC K/J型溫度計 |
UVA, UVC 選擇 | 通過按下前按鈕來選擇。 |
紫外傳感器光譜 覆蓋范圍 | UVA : 250 nm to 390 nm. UVC : 200 nm to 290 nm. |
UV '傳感器結構 | 具有余弦校正濾波器的專用UV光傳感器。 |
紫外光調零 | 一鍵完成 |
數據可存儲 | 最小值的讀取和存儲 | |||
數據采集器采樣時間設置范圍 | Auto | 1 second to 3600 seconds @ Sampling time can set to 1 second, but memory data may loss. | ||
Manual | Push the data logger button once will save data one time. @ Set the sampling time to 0 second. @ Manual mode, can also select the 1 to 99 position ( Location ) no. | |||
Memory Card | SD memory card. 1 GB to 16 GB. | |||
高級設置 | *設置時鐘時間(年/月/日,小時/分鐘/秒) *SD卡設置小數點 *自動關機管理 | |||
溫度補償 | 自動溫度控制K/J型溫度計的補償。 | |||
高級設置 | *設置嗶嗶聲開/關 *設置K型或J型溫度計類型 *設定溫度單位為℃或℃ *設置采樣時間 *SD存儲卡格式 | |||
數據保持 | 顯示讀數凍結。 | |||
存儲 | 最小值 | |||
顯示采樣時間 | 約 1 s | |||
數據輸出 | RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug. * Connect the optional USB cable USB-01 will get the USB plug. | |||
工作溫度 | 0 to 50 ℃. | |||
工作濕度 | 低于85% R.H. | |||
電源 | * Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 6 PCs, or equivalent. | |||
* DC 9V adapter input. ( AC/DC power adapter is optional ). | ||||
電源電流 | 正常操作(W/O SD卡保存數據和LCD背光關閉):大約6.5毫安。 | |||
當SD卡保存數據,而LCD背光關閉時:大約30毫安。 | ||||
*如果LCD背光,功耗將增加約16毫安。 | ||||
Weight | Meter | 351 g. | ||
UVA probe | 100 g. | |||
UVC probe | 103 g. | |||
Meter | 177 x 68 x 45 mm | |||
UVA probe | Head | 45 mm dia x 32 mm | ||
Handle | 125 x 24 mm dia. | |||
UVC probe | 38 mm DIA. x 25 mm | |||
配件 | * Instruction manual 1 PC * UVA light sensor. 1 PC * UVC light sensor. 1 PC * Hard carrying case, CA-06 1 PC |