EE1950
高濕露點測量模塊
高濕及結露環境中精密測量的理想選擇。即使在灰塵和化學污染環境也表現出眾。
EE1950系列露點模塊，專為持續高濕和冷凝環境而研發。在-70…180°C的全量程工作溫度范圍內都進行溫度補償，是環境試驗箱應用的理想選擇。
E+E公司研發的創新型加熱式HMC01型溫濕度敏感元件，使EE1950即使在持續高濕的環境中也能保持的長期穩定性。
利用外置溫度傳感器，露點模塊可精確計算相對濕度用于環境試驗箱控制。
E+E公司的敏感元件鍍膜技術可有效地抵抗灰塵、泥垢以及化學腐蝕性的污染，變送器即使工作在苛刻的環境中也能保持良好的穩定性。
傳感器的自動修復功能（ARC），使其可以很好地對抗化學污染；通過可控制的加熱處理，可驅逐附著在敏感元件上的化學物質。
EE1950露點模塊可根據需要設置電流輸出或電壓輸出。通過電路板上的串口可設置電流或電壓的輸出對應范圍，并可進行校準。EE-PCS配置和校準軟件可在/configurator免費下載。提供兩種規格尺寸的電路板，使模塊更易于集成到現有的環境試驗箱中。
特點
加熱式溫濕度敏感元件
傳感器自動修復功能（ARC）使其具有的長期穩定性
E+E的特殊鍍膜技術使敏感元件可以有效地抵抗灰塵及腐蝕性污染
工作溫度范圍可達-70 °C...180 °C
可通過串口進行配置和校準
可選擇電壓或電流輸出
The outstanding long term stability of the EE1950 under continuous high humidity conditions rests on the innovative, heated E+E humidity and temperature sensing element HMC01.
Together with an additional, external temperature sensor, the dew point module is the perfect solution for precise calculation of the relative humidity and for climate chamber control.
The proprietary E+E coating protects the sensing element from dust, dirt and corrosive agents. Therefore, the EE1950 performs reliably even in harsh environment.
Thanks to the Automatic Sensor ReCovery (ARC) function, the sensor also copes well with chemical contamination. By controlled heating, the chemicals gaze out from the sensing element.
The analogue output of the EE1950 can be set to current or voltage. The service interface and the free EE-PCS configuration software allow for output scaling and adjustment. The electronics board is available in two sizes, for easy integration into existing climate and test chambers.
Features
- Heated humidity and temperature sensing element
- Outstanding long term stability due to Automatic Sensor Recovery
- High resistance to dust and corrosion thanks to E+E proprietary sensor coating
- Wide temperature working range -70 °C...180 °C
- Service interface for configuration and adjustment
- Voltage or current output, selectable
Technical data
-
-70...180 °C (-94...356 °F)
Temperature Working Range -
-20...100 °C Td (-4...212 °F Td)
Measuring range Dew point -
0-1/5/10 V or 0/4-20mA (3-wire)
Outputs -
10-35V DC and 10-28V AC
Supply
技術資料
-70...180 °C
溫度工作范圍-20...100 °C Td
露點溫度測量范圍0-1/5/10 V 或 0/4-20mA (3線)
輸出10-35V DC 和 10-28V AC
供電電源
