型號及額定工作溫度
型號 THHN THWN THWN-2 TFNTFFN
工作條件 90℃ 干 75℃ 干或濕 90℃ 干或濕 90℃干或濕 90℃ 干或濕
主要用途及使用特性
尼龍護套電線電纜比普通的PVC絕緣電線電纜具有更優良的電氣和物理性能：
尼龍護套電線電纜具有較好的耐熱性，在高溫下運行失重小的特點，可以提高電線瞬時抗熱過載能力，可減緩或降低PVC組份的逸出或遷移。
尼龍護套電線電纜具有耐腐性和自潤滑性及耐油的特點。
與同截面的PVC絕緣電線電纜相比，尼龍護套電線電纜具有外徑小、重量輕、靜磨擦系數小和***等特點，可提高敷設中的安全性和適用性。
尼龍護套線額定工作電壓450/750V, ***應用于家用電器、航空航天系統、建筑和照明,。
電纜的長期工作溫度為90℃或75℃，敷設的溫度不低于0℃，彎曲半徑應不小于電纜外徑的4倍。
青島青纜科技有限責任公司***制造銷售美標UL認證電線電纜，尼龍護套線THHN, THWN, THWN-2,加拿大CSA認證T90,UL認證聚氯乙烯絕緣電纜TW, THW, THW-2, UL44聚烯烴絕緣阻燃電纜XHHW, XHHW-2, RHH, RHW, UL聯鎖鎧裝電纜MC, UL1277多芯尼龍護套線托架用電線電纜VNTC, TC-ER,UL用戶引入線、光伏用線USE-2, USE,SE-R,SE-U,UL認證耐油電纜SE, SO, SOO, UL電子線UL1007, UL1015,deep well pumpcable, UL灌溉電纜irrigation cable
PVC Insulated Nylon Sheathed Cable
Type and temperature rating
TYPE | THHN | THWN | THWN-2 | TFN | TFFN |
Temperature rating | 90℃ Dry | 75℃ Dry or Wet | 90℃ Dry or Wet | 90℃Dry or Wet | 90℃Dry or Wet |
Description of the purpose and usage properties
The nylon sheathed cable has more excellences in physical and electrical performance than the PVC cable.
The cable has smaller outer diameter, lighter weight, less static friction coefficient than the same size of PVC cable, which greatly improve safety and convenience in installation and assembly of the cable.
It is self-lubrication, and has good resistance to corrosion, oil, acids, alkali, and moisture.
The cable is widely used in fixed installation, home appliance, lighting equipment, construction and aviation engine room with voltage up to 450/750V.
Its permitted long term working temperature shall be 70℃ or 90℃, installation temperature shall be over 0℃, and maximum bending radius shall be not less than 4 times of outer diameter of the cable.
Standard
UL83 UL66
Specification and construction (mm)
型號規格 | 導體根數 | 單線直徑mm | 絕緣厚度mm | 尼龍厚度mm | 參考外徑mm | 參考重量kg/km | 15℃絕緣電阻GΩ.m |
18AWG | 7 | 0.39 | 0.38 | 0.1 | 2.20 | 11.8 | |
16AWG | 7 | 0.49 | 0.38 | 0.1 | 2.50 | 17 | |
14AWG | 1 | 1.63 | 0.38 | 0.1 | 2.60 | 25 | 205 |
12AWG | 1 | 2.05 | 0.38 | 0.1 | 3.10 | 36.9 | 175 |
10AWG | 1 | 2.59 | 0.51 | 0.1 | 3.90 | 59 | 180 |
8AWG | 7 | 1.23 | 0.76 | 0.13 | 5.50 | 98 | 185 |
6AWG | 7 | 1.56 | 0.76 | 0.16 | 6.60 | 151 | 155 |
4AWG | 7 | 1.96 | 1.02 | 0.15 | 8.30 | 240 | 155 |
3AWG | 7 | 2.2 | 1.02 | 0.15 | 8.90 | 294 | 145 |
2AWG | 7 | 2.47 | 1.02 | 0.15 | 9.80 | 364 | 130 |
1AWG | 19 | 1.69 | 1.27 | 0.18 | 11.40 | 470 | 140 |
1/0AWG | 19 | 1.89 | 1.27 | 0.18 | 12.40 | 577 | 130 |
2/0AWG | 19 | 2.12 | 1.27 | 0.18 | 13.60 | 714 | 115 |
3/0AWG | 19 | 2.39 | 1.27 | 0.18 | 14.90 | 893 | 105 |
4/0AWG | 19 | 2.68 | 1.27 | 0.18 | 16.40 | 1109 | 95 |
250MCM | 37 | 2.09 | 1.52 | 0.2 | 18.10 | 1326 | 105 |
300kcmil | 37 | 2.29 | 1.52 | 0.2 | 19.50 | 176 | 95 |
350kmcil | 37 | 2.47 | 1.52 | 0.2 | 20.80 | 1820 | 90 |
400kcmil | 37 | 2.64 | 1.52 | 0.2 | 22.10 | 2066 | 80 |
450kcmil | 37 | 2.8 | 1.52 | 0.2 | 23.10 | 2312 | 80 |
500kcmil | 37 | 2.95 | 1.52 | 0.2 | 24.20 | 2555 | 75 |
550kcmil | 61 | 2.41 | 1.78 | 0.23 | 25.80 | 2837 | 80 |
600kcmil | 61 | 2.52 | 1.78 | 0.23 | 26.80 | 3090 | 80 |
650kcmil | 61 | 2.62 | 1.78 | 0.23 | 27.80 | 3329 | 75 |
700kcmil | 61 | 2.72 | 1.78 | 0.23 | 28.70 | 3577 | 70 |
750kcmil | 61 | 2.82 | 1.78 | 0.23 | 29.50 | 3834 | 70 |
800kcmil | 61 | 2.91 | 1.78 | 0.23 | 30.40 | 4073 | 70 |
900kcmil | 61 | 3.09 | 1.78 | 0.23 | 32.00 | 4573 | 65 |
1000kcmil | 61 | 3.25 | 1.78 | 0.23 | 33.50 | 5042 | 60 |
Main technical performance
Test Item | Test Requirement | Test Result | Test Standard |
Flame test | Pass | Pass | UL 1581 |
Insulation resistance in water | Pass | Pass | UL 1581 |
Convolute and cold bend test | No cracks | No cracks | UL 1581 |
Oil resistance test | Pass | Pass | UL 1581 |
Delivery
The cable shall be delivered in coil. Each package of delivery shall be 100 meters, among which can include the short wires of no less than 10 meters, and the length of the short wires shall not be over 10% of total length of each package.
Any delivery length shall be permitted in accordance with the purchasers' requirement
