型號描述
堅固的緊湊型位置調節器，適合安裝在標準化的推動和擺動驅動裝置（參照 IEC 534-6 或 VDI/VDE 3845）上。帶有分段式位移傳感器的類型，也可用于調節 Bürkert 過程調節閥。通過電流標準信號 4…20mA 或 AS 端口（選項）規定數字式電氣位置調節器即定位器 Side- Control BASIC 的額定值。另外，還有一個二進制輸入端和一個可選的模擬反饋信號可用。分別通過一個機械式指示元件和三個彩色 LED 指示閥門開口度和裝置狀態。所有操作元件均處于外殼內部。調試過程自動進行，通過 DIP 開關可直接在裝置上激活以下功能：- 密封關閉臨界值 - 額定信號的作用方向逆轉 - 特征曲線選擇 - 手動/自動模式的切換。借助于通訊軟件還能實現其他的配置和參數化可能性，例如通過一個可編程的修正特征曲線將運行特征曲線線性化。氣動調節系統可同樣地應用于單作用和雙作用的驅動裝置。其特征在于，在電氣或氣動輔助能量失效時，仍能保持一個定義的安全特性，在供應壓力為 7 bar 時，可用的空氣功率范圍非常大。
1）緊湊型金屬外殼
2）通過調諧功能實極為簡便的調試
3）具有高空氣功率的動態調節系統
4）可通過通訊軟件參數化大量軟件附加功能
5）根據 IEC 534-6 / VDI VDE 3845 進行安裝
Type Description
The robust and compact positioner is designed to a standardisation acc. to IEC 534-6 or VDI/ VDE 3845 for assembly with linear and rotary actuators. In addition, the remote version with the displacement position sensor can be combined with Bürkert process control valves The setpoint setting for the electro-pneumatic digital Positioner SideControl BASIC occurs using a standard signal 4…20mA or with AS-Interface as an option. In addition there is a binary input and an optional analogue feedback available. The valve opening is signalled by a mechanical indicator element and the device staus is shown on three coloured LEDs. All the operational elements are found in the housing . The start-up happens automatically, and directly at the device the following functions can be activated through DIP switches: - Close tight function - Inversion of the operating direction of the setpoint signal - Characteristic curves selection - Switching between manual and automatic mode. Additional possibilities on configuration and parameter setting, for example, linearisation of the operation characteristics by using communications software which allows customised programming. The pilot valve system can be used equally for single and double-acting drives. It is characterised by a defined safety feature in case of failure of the electrical or pneumatic power supply and possesses an enormous air capacity range with pressure supply up to 7 bar.
1）Compact and robust design
2）Easy to start using Tune function
3）Dynamic positioning system with no air consumption in controlled state
4）AS-Interface Fieldbus (optional)
5）Mounting acc. to IEC 534-6 / VDI VDE 3845 or Remote
