型號描述
緊湊型傳送 8026 特別適合不含固體的液體，其用途非常廣泛（水、廢水監控、化學處理...）。可在短型或長型傳感器結構中使用帶有葉輪式傳感器的傳送器（取決于所用的接頭 DN）。這種指形傳感器被一個銷釘固定在外殼上。外殼包含電子設備模塊和一個可拆下的指示器。設備也可在沒有指示器的情況下工作，但為了對傳送器進行編程（即數據參數化、標準參數復位、對在讀取運行時應該輸出的信息進行編程、訪問代碼、電流輸出特性等），同時對測得的和處理的數據進行持續觀察，要求存在指示器。8026 型設備的可用部件有：- 2 個可編程的輸出端：一個晶體管輸出端 (NPN) 和一個 4-20-mA 電流輸出端（雙線）- 3 個可編程的輸出端：兩個晶體管輸出端 (NPN/PNP) 和一個 4-20-mA 電流輸出端（雙線）- 4 個可編程的輸出端：兩個晶體管輸出端 (NPN/PNP) 和兩個 4-20-mA 電流輸出端（三線）8026 型設備能夠轉換測量信號，以不同尺寸單位顯示不同數值（如果已插上顯示模塊）并計算通過一個或兩個 M12 插拔連接器傳輸的輸出信號。傳送器具有一個或兩個晶體管輸出端，能夠接通一個電子閥、激活一個警報并借助于一個或兩個電流輸出端 4-20 mA 建立一個或兩個調節回路。
1）PN10、DN15 至 DN400 過程接口
2）可編程的輸出端：1 或 2 個晶體管輸出端以及 1 或 2 個電流輸出端 4-20 mA
3）可拆除的指示器，帶有背景照明裝置，適合流量和體積，帶有兩個數量計數器
4）通過 TEACH-IN 自動校準，檢查所有無流量輸出端
Type Description
The Bürkert transmitter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing...). The transmitter is equipped of a sensor with paddle-wheel, available in long or short version (depend on DN of used fitting). This sensor holder is plugged-in and pined to an enclosure with cover, containing the electronic module. A removable display completes this transmitter. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, programme information to be displayed, programme access codes, adjust 4-20 mA output(s) ...) and also for visualizing continuously the measured and processed data. The device Type 8026 is available with: - 2 programmable outputs : one transistor output (NPN) and one 4-20 mA current output (2-wire) - 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) - 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8026 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.
1）PN10, DN15 to DN400 fluidic process connection
2）Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA analog output(s)
3）Removable backlit display of flow and/or two totalized volumes
4）Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow
