Simplify the complicated EMC measurement and debugging!
The continuous integration and complication of consumer electronics have produced numerous electromagnetic radiation sources. EMC tests can ensure various electronics products’ safety and effectiveness. In order to reduce the development cost and shorten development time, more and more companies are now focusing on EMC planning at the preliminary design phase. In addition to sending products to the lab, they are also looking for or try to establish an EMC solution which is cost effective and test effective diagnosis method.
GW Instek introduces the latest and comprehensive EMC pre-compliance testing solution to meet customers’ requirements of EMC conduction and radiation testing during product development and verification stages. The EMC pre-compliance testing mode is ideal for electronics product development. With this solution, users can resolve problems at the earliest phase to avoid reconfiguration once the product development was finalized. Reducing product development cycles and verification laboratory fees are conducive to expediting the process of product verification and launch time.
For different test categories, GW Instek provides different test packages,
Radiation EMI testing package
- Spectrum Analyzer: GSP-9330
- EMI Near Field Probe Set: GKT-008
- DC Block: ADB-008
- Transient Limiter: GPL-5010
Conduction and radiation EMI testing package
- Spectrum Analyzer: GSP-9330
- EMI Near Field Probe Set: GKT-008
- DC Block: ADB-008
- Two-Line V-Network(LISN): GLN-5040A
- Transient Limiter: GPL-5010
- Isolated Transformer: GIT-5060
Conduction EMI testing package
- Spectrum Analyzer: GSP-9330
- Two-Line V-Network(LISN): GLN-5040A
- Transient Limiter: GPL-5010
- Isolated Transformer: GIT-5060
Radiation EMS testing package
- Spectrum Analyzer: GSP-9330 + Tracking Generator
- EMI Near Field Probe Set: GKT-008
01gw_product_detail_bar.pngGSP-9330 Spectrum Analyzer
02gw_product_detail_bar.pngGKT-008 EMI Near Field Probe Set
03gw_product_detail_bar.pngGLN-5040A Two-Line V-Network(LISN)
04gw_product_detail_bar.pngGIT-5060 isolated transformer
05gw_product_detail_bar.pngGPL-5010 Transient Limiter
GSP-9330 spectrum analyzer
Power Cord, Certificate of Calibration, CD-ROM (with User Manual, Programming Manual, SpectrumShot Software, SpectrumShot Quick Start Guide & IVI Driver)
GKT-008 EMI Probe Set
User Manual
GPL-5010 Transient Limiter
User Manual，Warranty Card，Test Report，N(M) to BNC(F)
GLN-5040A Two-Line V-Network(LISN)
User Manual，Adaptor BNC(F) to N-type(M)，Cable BNC(M) to BNC(M)，German Standard Power Adaptor，Warranty Card，Test Report
GIT-5060 Isolated transformerPower Cord, User Manual, Warranty Card
Options
GSP-9330 spectrum analyzerOpt.01 Tracking Generator
Opt.02 Battery Pack
Opt.03 GPIB Interface
ADB-008 DC Block50ohm，SMA(male)~SMA(female)，0.1MHz-8GHz
Optional Accessories
GSC-009portable backpack
GRA-415rack panel
Free DownloadSpectrumShot Software EMI pretest and remote control software for GSP-9330 (available on GW Instek website)
IVI Driver for GSP-9330 supports LabVIEW/LabWindows/CVI (available on NI website)
EMC測試解決方案
GKT-008, EMI近場探棒組
GLN-5040A, 線性阻抗穩定網絡
GIT-5060, 隔離變壓器
GPL-5010, 脈沖限幅器
附件信息
電源線，簡易手冊，校正證明書，
CD光盤 (含使用手冊、程序指令集手冊、SpectrumShot軟件、Spectrumshot簡易手冊及IVI驅動程序)
