C2T系列開環型可拆卸霍爾電流傳感器的初、次級之間是絕緣的，用于測量直流電流。
電參數 Electrical data (Ta=25℃±5℃,RL=2KΩ,CL=10000PF)
|
Type |
C2T-50A |
C2T-100A |
C2T-200A |
C2T-400A |
C2T-600A | 單位 Unit |
| 額定輸入電流(Ipn) Rated current(Ipn) |
±50 |
±100 |
±200 |
±400 |
±600 |
A |
| 測量電流范圍(Ip) Measure range(Ip) |
0—±75 |
0—±150 |
0—±300 |
0—±600 |
0—±900 |
A |
| 額定輸出電壓 Rated output |
@Ip=±Ipn ±2±1% |
V | ||||
| 零點電壓 Zero voltage |
@Ip=0 5±0.5% |
V | ||||
| 電源電壓 Supply voltage |
+12，+15，+24 |
V | ||||
| 功耗電流 Power Consumption |
≤15 |
mA | ||||
| 零點失調電壓 Zero offset voltage |
@Ip=0 ±20 |
mV | ||||
| 磁失調電壓 Magnetic offset |
@Ip=±Ipn-0 ±15 |
mV | ||||
| 失調電壓溫漂 Offset drift |
@ -40～+85℃ ≤±0.5 |
mV/℃ | ||||
| 輸出電壓溫漂 Output drift |
@ -40～+85℃ ≤±0.5 |
mV/℃ | ||||
| 線性度 Linearity |
@Ip=0-±Ipn ≤1 |
%FS | ||||
| 響應時間 Response time |
@50A/μS, 10%-90% ≤7 |
μs | ||||
| 絕緣電壓 Galvanic isolation | @ 50HZ,AC,1min 2.5 |
KV | ||||
· 交流變速驅動器
AC variable speed drives
· 直流電機驅動靜態轉換器
Static converters for DC motor drives
· 變頻調速系統
Variable speed drives
· 電焊機
Power supplies for welding applications
· 通訊電源
Battery supplied applications
· 不間斷電源UPS
Uninterruptible Power Supplies (UPS)
· 開關電源
Switched Mode Power Supplies (SMPS)
結構參數 Mechanical dimension(for reference only)
Remarks：
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation: 1:+12V 2:OV 3:V 0UT 4:NC
使用說明 Directions for use
1. 當待測電流從傳感器穿過，即可在輸出端測得電壓大小。(注意：錯誤的接線可能導致傳感器損壞)
When the current will be measured goes through a sensor, the voltage will be measured at the output
end. (Note: The false wiring may result in the damage of the sensor)
2. 傳感器的輸出幅度可根據用戶需要進行適當調節。
Customs can adjust output amplitude of the sensor by needs.
3. 可按用戶需求定制不同額定輸入電流和輸出電壓的傳感器。
Custom design in the different rated input current and the output voltage are available.
執行標準 Standards
· UL94-V0.
· EN60947-1:2004
· IEC60950-1:2001
· EN50178:1998
· SJ 20790-2000
總體參數 General date
|
| 數值 Value | 單位Unit |
| 工作溫度 (TA) Operating temperature |
-40 to +85 |
℃ |
| 儲存溫度 (TS) Storage temperature |
-40 to +125 |
℃ |
| 毛重(約) (M) Mass(approx) |
65 |
g |
