Features

¤  The hardened threads with smooth surface finishing avoid galling and help to extend the fitting service life.

¤  Every fitting is stamped with size, material, and heat code.

¤  316 stainless steel is standard material. Other materials are available upon request.

Working Pressure

The working pressure of Adapters and Couplings is shown in the ordering information table.

Elevated Temperature Factors

To get the maximum working pressure at elevated temperature, use the maximum working pressure at ambient temperature to multiply the factors in the table below.

Data in this table is applied only to the working temperature below 800°F (427°C), For the working temperature above

800°F (427°C) please consult FITOK Group, and then we will provide you relative solutions.

About "CP"

Ordering number with designator "□CP" is for "two-piece" male to male and female to male adapters. They are identical to

the "one-piece" designs in length can be ordered by substituting "CP" for "MP" to the "one-piece" adapter part numbers listed.

Example:

Ordering number of "one-piece": SS-MMA-6MP6-6MP4

The corresponding ordering number of "two-piece" is SS-MMA-6CP6-6CP4.

Caution:

¤  Do not loosen or tighten fittings under pressure.

¤  Always use proper thread sealants on tapered pipe threads.