進口膠管閥  Import hose valve
膠管指以橡膠管套為密封件和啟閉件，通過手輪的傳動帶動上下閘板運動，從而對壓縮管套進行關閉和開啟的閥門。
Hose refers to the rubber sleeve for the seal and the opening and closing parts, through the hand wheel drives the upper and lower gate movement, so as to open and close the valve to a compression sleeve.
進口膠管閥特點 Import hose valve characteristics ：
1.膠管閥多功能閥，它能代替閘閥，截止閥，調節閥使用。
Multifunctional valve 1 hose valve, which can replace the gate valve, globe valve, adjusting valve.
2.橡膠遠比鋼、鐵及其它各種金屬材料耐磨，當介質帶有固體顆粒介質時，管夾閥能勝其任。
rubber than wear-resistant steel, iron and other metal materials, when the medium with solid medium, pipe clamp valve can win any of its.
3.橡膠對配方的調整可以耐各種化學溶劑的腐蝕，
Adjust the 3 rubber on the formulation of the corrosion resistance of various chemical solvent,
4.膠管兩端帶有橡膠法蘭。當閥門與管道連接時，不需另加密封墊圈，閥位上無跑、冒、滴、漏等不良現象發生。
The 4 hose ends with the rubber flange. When the valve and pipeline connection, without the other sealing gaskets, valve position without adverse phenomena run, run, drip, leak.
5.結構簡單，便于檢修和更換膠管。
simple structure, easy maintenance and replacement of rubber hose.
6.耐寒性能好。由于流體介質在富有彈性的膠管中流動，從而排除了流體晶化所造成的殼體凍裂等惡果。
cold resistance is good. The fluid flow in the hose flexible, thereby excluding the fluid crystallization caused by evil shell cracking.
進口膠管閥由閥體、閥桿、膠管、擠壓結構、手輪等部件組成，膠管由天然橡膠精工配料模壓而成。
Import hose valve consists of valve body, valve, hose, the structure of extrusion, hand wheel and other parts, from natural rubber hose Seiko ingredients and molding.
此閥結構簡單，是國內*無泄漏閥門，能耐各種中等濃度的酸任意濃度堿鹽溶液，能輸送礦漿和干濕的粉料及有結冒物體介質。
This valve has simple structure, is the only domestic valve without leakage, acid free alkali concentration salt solution can resist various medium concentration, powder conveying dry and pulp and node object medium at.
使用溫度≤160℃  The use of temperature≤ 160 ℃
設計壓力≤2.5MP  Design pressure is 2.5MP
產地：德國  Origin: Germany
產品品牌：德國Orsen奧爾申  The product brand: German Orsen
德國Orsen奧爾申膠管閥優點  Germany Orsen Creole Shen hose valve advantages:
進口膠管閥可以在管道上任意安裝，沒有介質流向限制。2、采用進口優質橡膠，耐磨耐腐蝕，使用壽命長。3、閥體材質有鋁合金和鑄鐵，鑄鋼，不銹鋼，可*使用；在*使用下一般只需更換管套Import hose valve can be installed in the pipeline, not the flow of media restrictions. 2, the use of imported high-quality rubber, corrosion resistant, long service life. 3, the body is made of aluminum alloy and cast iron, cast steel, stainless steel, can be used for a long time; in the long-term use is only replaced.