日本SMC大流量型油霧器參考書
減少相對運動件間的摩擦力,
2、減少密封材料的磨損,以防止泄漏,
3、防止管道及金屬零部件的腐蝕,延長元件使用壽命..
不給油潤滑：采用橡膠材料作為滑動部位的密封件，密封件帶有滯留槽結構內存潤滑脂來潤滑。
噴油潤滑：有油霧器和集中潤滑元件兩種。.
注意事項：
1、不給油潤滑元件也可給油潤滑，一旦給油，中途不得停止供油。
2、不要使用錠子油和機油，以免使密封件膨脹。.
 不給油潤滑已很普遍，而給油潤滑逐漸減少。
將潤滑油進行霧化并注入空氣流中,隨壓縮空氣流入需要潤滑的部位,達到潤滑的目的..

日本SMC大流量型油霧器參考書
When the volume of oil reaches a certain
level, float e ascends, valve t descends via
lever r, nozzle w closes, and the feeding of
oil stops, thus completing the oil feeding
process. When the oil inside the case is
consumed, float e descends, valve t ascends
via lever r, allowing oil to be fedfrom nozzle w.
The oil that has been pumped from the tank
passes through felt q where it is filtered,
and is fed into the case through nozzle w.