This Pink Noise Generator meets the requirements for pink noise in IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E. It is especially developed for all types of tone frequency amplifiers, when you need 2 channels/phase 90° Technical Specification • Pink noise or sine wave 1000 Hz (not at the same time) • Two output channels when testing • The channels can be phase shifted to 0° or 90° • Fine adjustments of output voltage • RCA and 4 mm banana type output connectors • Audio-cables for test object included (RCA and 3,5 mm phono) • Output signal according to IEC 60065 Annex C, fig. C1 (IEC 60268) • Amplitudes of sine wave and pink noise according to table below: Output Voltage Sine wave 1 kHz Filtered pink noise Low: 0-100 mV/1 kohm 0-35 mV rms/1 kohm Medium: 0-1 V/1 kohm 0-350 mV rms/1 kohm High: 0-5 V/1 kohm 0-1,7 V rms/1 kohm
