檢查保險絲座 測試熔斷器底座是用來測試保險絲的保險絲座。可作為單保險絲持有人或3或6保險絲持有人在同一平臺上。保險絲額定> 6,3 A. 用于測試標準： IEC 60127，7.3.1條款，如圖2所示
瑞典Friborg保險絲座
The Test Fuse Base is a fuse holders used to test fuses. Available as single fuse holder or with 3 or 6 fuse holders on same platform. For fuses rated >6,3 A Technical Specifications • Silver plated fuse holders • Spring for 8-12 N contact pressure • Can be altered for 5x20 and 6,3x32 mm fuses with current rating exceeding 6,3 A • 2x50 cm connection leads included. These can easily be removed and replaced with 4 mm banana-type leads
Test Fuse Base
The Test Fuse Base is a fuse holders used to test fuses. Available as single fuse holder or with 3 or 6 fuse holders on same platform. For fuses rated >6,3 A.
Used in test standard: IEC 60127, clause 7.3.1, Fig. 2
