美國FLOWLINE LU20,LU30超聲波液位計
應用:
這里提供的是經CSA和Cenele認證的，本安型或通用型結構的兩線制超聲波液位變送器。可用于非接觸式的液位測量，測量上限是18′ 或5.4m。它適用于儲存罐、工藝罐和儲存池。適用的介質除一般液體外，*適合用于腐蝕性液體、海水、泥漿、廢液的測量。并且它可在危險級別的場合安裝。適用的介質還包括內燃機燃料和鹽酸。
特點:
1 .LCD數字顯示，用英寸或cm指示液位。
2. 提供小型接線盒和加長型探頭，使安裝靈活
3 通過EasyCal軟件，使用戶能簡單地用按鍵標定量程。
4.可調節量程和死區，內部的濾波器可消除錯誤的回波信號，使測量更可靠。
選型說明
LU20-5001: 2″NPT（US） 普通非防爆型
LU20-5061: 2″G（公制） 普通非防爆型
LU20-5001-IS: 2″NPT（US） 普通防爆型
LU20-5061-IS: 2″NPT（US） 普通防爆型
LU30-5003: 2″NPT（US） 普通三線制
量程： | LU20:15cm－5.4m |
| LU30:15cm－7.6m |
精度： | ±0.25% FS 空氣中 |
分辨率： | 3mm |
射束寬： | 8o 錐形射束 |
死區： | 15cm |
顯示類型 | LCD，4位數 |
顯示單位 | Inch.或cm |
儲存器： | 非易失性內存 |
供電電壓 | 12－32VDC |
回路電阻 | 600Ω @ 24VDC |
信號輸出 | 4－20mA，兩線制 可倒向 |
標定： | 數字，按鈕 |
過程溫度 | －40℃―60℃ |
溫度補償 | 自動 |
元件溫度 | －20℃－60℃ |
壓力： | 2bar@25o,25o以上每度降低0.113bar |
密封等級 | NEMA 4X（IP65） |
安裝高度 | 在罐上13cm |
外殼材料 | PP，UL94VO |
本體材料 | PVDF |
過程接頭 | 2″NPT（2″G） |
進線口： | 單個，1/2″NPT |
類型： | 本安型 |
認證： | CSA:ClassI,GroupsA,B,C; |
| ClassII,GroupsE,F,G; |
| ClassIII; |
| GroupsA,B,C,D; |
| Eex ia IIC T3 |
CE 認證 | EN 50082-2 抗干擾性能 |
| EN 55011 發射性能 |
詳細英文介紹| Browse the Products |
| EchoTouch™ GP 3-Wire Ultrasonic Transmitter |
| |
| | Application | | The general purpose three-wire ultrasonic transmitter provides non-contact level measurement up to 24' or 7.4m with an internal relay that can be configured as a single-point alarm or latched on two points for automatic fill or empty control. The transmitter is ideally suited for challenging corrosive or waste liquids and is typically selected for atmospheric bulk storage and waste sump applications. Media examples include wastewater and resin. |
| | Features | | Integral relay for alarm or automatic fill-empty control | | LED digital display indicates level in inches or centimeters | | EasyCal simple push button calibration for all user set points | | PP enclosure rated NEMA 4X with rugged PVDF transducer |
|
| | Tech Tip | For applications with surface foam, turbulence or limited measurement space, install the transmitter in a 2" stand-pipe.
| |
|
|
| Specifications | Range: | 6" to 24.5' (15cm to 7.4m) | Accuracy: | ±0.25% of span | Resolution: | 0.125" (3 mm) | Beam width: | 8° conical | Dead band: | 6" (15 cm) | Display type: | LED, 4-digit | Display units: | Inch or cm | Memory: | Non-volatile | Supply voltage: | 14-36 VDC | Consumption: | 200mA max. | Current flow: | Source/sink | Signal output: | 4-20 mA, three-wire | Signal invert: | 4-20 mA, 20-4 mA | Calibration: | Push button | Contact type: | (1) SPDT relay, latching | Contact rating: | 250 VAC @ 10A | Contact logic: | Single point: alarm
Two point: latching | Contact fail-safety: | Reverts to safe state
during echo-loss | LED indication: | Relay status | Process temp: | F: -20° to 140°
C: -4° to 60° | Temp. comp.: | Automatic | Ambient temp: | F: -40° to 140°
C: -40° to 60° | Pressure: | 30 psi (2 bar) @25°
C., derated @1.667
psi (.113 bar) per °C.
above 25° C. | Enclosure rating: | NEMA 4X (IP65) | Encl. material: | PP, UL94VO | Trans. material: | PVDF | Cable jacket mat.: | Vinyl | Cable type: | Pow./signal: 3-conductor
Relay: 3-conductor | Cable length: | 9" (22 cm) | Process mount: | 2" NPT (2" G) | Mount. gasket: | ± Viton® | Conduit entrance: | Single, 1/2" NPT | Classification: | General purpose | CE compliance: | EN 61326 EMC
EN 61010-1 safety |
|
|
|
Compatible Products | | | | DataView™ II LI55 Advanced Meter and Controller | | The general purpose meter displays engineering units with one 4-20 mA or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 mA repeater. |
| | Commander™ LI90, Advanced Micro PLC Controller | | As a compact, powerful controller - the Commander series can be used in literally thousands of applications. From OEM machine control to machine monitoring in a plant environment, the Commander series can be instrumental in keeping you or your customer's automation activities running smoothly. |
|
|
